TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 210 of 554

TM 9-2815-224-34&P

Valve Mechanism Maintenance Instructions

7-9. CAMSHAFT REMOVAL/REPAIR/INSTALLATION (CONT).

(24)

(25)

(26)

(27)

(28)

(29)

(Cont)

Place clean cloth between teeth of camshaft gears (4 and 5).

Tighten nuts (28) on rear end of camshafts (1 and 3) to 300 lb-ft (407 N•m).

Tighten nut (22) on front end of camshaft (3) to 300 lb-ft (407 N•m).

NOTE

Remaining nut on right camshaft is installed with water pump drive

Put two retainers (29) in mounting position on camshaft gears (4 and 5).

Install eight screws (30) in two adapters (31) and retainers (29).

Tighten screws (30) to 40 lb-ft (54 N•m).

gear.

7-32