TM 9-2815-224-34&P
Valve Mechanism Maintenance Instructions (Cont)
7-11 IDLER GEAR REMOVAL/REPAIR/INSTALLATION
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning/Inspection
f. Follow-on Maintenance
INITIAL SETUP
Models
References
All
None
Test Equipment
Equipment Condition
None
TM or Para
Condition Description
Special Tools
TM 9-2320-279-34 Engine mounted on engine
Holding fixture, idler gear 2SK900
stand.
Set, dial indicator J7872
Para 5-3
Flywheel housing removed.
Supplies
Special Environmental Conditions
Solvent, dry cleaning, Item 60, Appendix C
None
Oil, lubricating, Item 48, Appendix C
General Safety Instructions
Personnel Required
None
MOS 63W, Wheel vehicle repairer
Level
of Maintenance
General Support
a .
Removal.
(1) Remove screw (1) and special washer (2).
(2) Remove idler gear assembly (3) from engine
block (4).
TA357727
7-36