TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 212 of 554

TM 9-2815-224-34&P

Valve Mechanism Maintenance Instructions (Cont)

7-10. CAMSHAFT END BEARING BUSHING REMOVAL/lNSTALLATION.

This task covers:

a. Removal

c. Follow-on Maintenance

b. Installation

INITIAL SETUP

Models

Equipment Condition

All

TM or Para

Condition Description

Test Equipment

Para 7-9

Camshaft end bearings

None

removed.

Special Tools

Special Environmental Conditions

None

None

Supplies

General Safety Instructions

None

None

Personnel Required

Level of Maintenance

MOS 63W, Wheel vehicle repairer

General Support

References

None

a. Removal.

NOTE

Do this procedure only if camshaft end

bearing bushings fail inspection specifications

in para 7-9. If one bushing in end bearing has

failed both bushings must be replaced.

(1)

(2)

Remove two thrust spacers (1) from

camshaft rear end bearing (2).

Remove two bushings (3) from camshaft

front and rear end bearing (4 and 2).

7-34