TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 124 of 736

TM 9-2815-225-34&P

0009 00

0009 00-2

MOUNTING ENGINE ON MAINTENANCE STAND (Contd)

1.

Remove oil pressure gauge sensing unit (4) and low oil pressure warning light sending unit (3)

from cylinder block (2).

NOTE

Perform step 2 for Big Cam I engines only.

2.

Remove transmission control-body heating elements ON/OFF switch (1) from cylinder block (2).

3.

Remove oil level dipstick (9) from oil level dipstick tube and cover (10).

4.

Remove screw (8), lockwasher (7), and washer (6) from tube brace (5). Discard lockwasher (7).

5.

Remove nut (11), lockwasher (12), two washers (13), screw (8), clamp (14), and tube brace (5) from

oil level dipstick tube and cover (10).

6.

Remove four captive washer screws (15), washers (16), oil level dipstick tube and cover (10), and

gasket (17) from cylinder block (2). Discard gasket (17).

Figure 2. Oil Level Dipstick Tube Removal.

Figure 1. Oil Pressure Gauge Sensing Unit Removal.

4

1

2

3

6

7

9

10

11

12

13

14

15

16

17

13

5

8

8

2