TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 128 of 736

TM 9-2815-225-34&P

0009 00

0009 00-6

MOUNTING ENGINE ON MAINTENANCE STAND (Contd)

NOTE

Perform steps 27 and 28 for Big Cam I only.

27.

Loosen four clamps (5) and remove two water transfer hoses (4) and water transfer tube (6) from

water transfer flange (2). Discard hoses (4).

28.

Remove six screws (1), water transfer flange (2), and gasket (3) from cylinder block (7). Discard

gasket (3).

NOTE

Perform steps 29 through 31 for Big Cam III only.

29.

Remove twelve screws (10), two water header covers (9), and gaskets (8) from cylinder block (7).

Discard gaskets (8).

30.

Remove six screws (13) and piston cooling nozzles (12) from cylinder block (7).

31.

Remove six O-rings (11) from piston cooling nozzles (12) Discard O-rings (11).

Figure 8. Piston Cooling Nozzles Removal.

4

5

5

1

2

3

6

7

8

9

10

11

12

13