TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 126 of 736

TM 9-2815-225-34&P

0009 00

0009 00-4

MOUNTING ENGINE ON MAINTENANCE STAND (Contd)

NOTE

Perform steps 17 and 18 for Big Cam I only.

17.

Bend tabs of four lockplates (4) and remove eight bolts (6), lockwashers (5), and lockplates (4)

securing exhaust manifold (3) to cylinder head (1) and dowels (13). Discard lockplates (4) and

lockwashers (5).

18.

Bend tabs of two lockplates (11) and remove four bolts (10), lockplates (11), clamps (12), exhaust

manifold (3), and six gaskets (2) from cylinder heads (1). Discard lockplates (11) and gaskets (2).

NOTE

Perform step 19 for Big Cam III only.

19.

Remove twelve captive head screws (9), exhaust manifold (7), and six gaskets (2) from cylinder

heads (1). Discard gaskets (2). Do not separate manifolds and spacer inserts (8) at this time.

20.

For exhaust manifold (7) or (3) repair, refer to WP 0025 00.

Figure 6. Exhaust Manifold Removal.

7

1

1

3

4

5

6

10

11

12

7

8

9

8

13

2