TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 226 of 736

TM 9-2815-225-34&P

0022 00

0022 00-2

OIL PAN, DIPSTICK, OIL SUCTION TUBES, AND BREATHER TUBE (Contd)

DISASSEMBLY

NOTE

Perform steps 1 and 2 for Big Cam I only.

1.

Remove two plugs (2) and one spacer (3) from oil pan (1).

2.

Remove four screws (4) and strainer element (5) from oil pan (1).

NOTE

Perform steps 3 through 5 for Big Cam III only.

3.

Remove washer (10) and nut (11) from oil pan (12).

4.

Remove clamp (9) and oil suction tube (8) from oil pan (12).

5.

Remove three pipe plugs (6), two plugs (7), and one spacer (13) from oil pan (12).

CLEANING AND INSPECTION

1.

For general parts cleaning information, refer to CLEANING, WP 0051 00.

2.

For general parts inspection information, refer to INSPECTION, WP 0051 00.

NOTE

Replace any part that does not pass visual inspection or is

outside specified wear limits.

3.

Inspect oil pan (12) and (1) for cracks, corrosion, warpage, and stripped or damaged threads.

Repair damaged threads as necessary.

4.

Inspect plugs (2), (6), and (7) for stripped or damaged threads. Replace any damaged plug.

5.

Inspect strainer element (5) for damage. Replace strainer element (5) if damaged.