TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 228 of 736

TM 9-2815-225-34&P

0022 00

0022 00-4

OIL PAN, DIPSTICK, OIL SUCTION TUBES, AND BREATHER TUBE (Contd)

CLEANING AND INSPECTION (Contd)

6.

Inspect oil level dipstick (2) and oil level dipstick tube (1) for cracks, bends, dents, and corrosion.

Discard oil level dipstick (2) or oil level dipstick tube (1) if damaged.

NOTE

Perform step 7 for Big Cam I only.

7.

Inspect oil suction tube (3) for cracks, bends, dents, corrosion, or rubbing marks caused by

vibration. Replace oil suction tube (3) if damaged.

NOTE

Perform step 8 for Big Cam III only.

8.

Inspect oil suction tube (4) and fitting (5) for cracks, bends, dents, and corrosion. Replace oil

suction tube (4) or fitting (5) if damaged.

NOTE

Perform steps 9 and 10 for Big Cam I only.

9.

Inspect breather tube (6) for cracks, bends, dents, and corrosion. Replace breather tube (6) if

damaged.

10.

Inspect breather hose (7) for rubbing marks caused by vibration, swelling, or cracks. Replace

breather hose (7) if damaged.

NOTE

Perform steps 11 and 12 for Big Cam III only.

11.

Inspect breather tubes (9) and (12) and aftercooler bracket (8) for cracks, bends, dents, and

corrosion. Replace breather tube (9) and (12) or bracket (8) if damaged.

12.

Inspect breather hoses (10) and (11) for rubbing marks caused by vibration, swelling, or cracks.

Discard breather hose (10) or (11) if damaged.