TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005
TM-9-2815-225-34-P

  TM-9-2815-225-34-P - Page 231 of 736

TM 9-2815-225-34&P
0023 00
0023 00-1
Tools and Special Tools
General mechanic’s tool kit: automotive
(Item 1, WP 0061 00)
Maintenance and repair shop equipment:
automotive (Item 2, WP 0061 00)
Automotive maintenance and repair
supplemental set no. 2 (Item 3, WP 0061 00)
Gear puller (Item 40, WP 0061 00)
Press
Mandrel (Item 39, WP 0061 00)
Drill press
Materials/Parts
OE/HDO 10 lubricating oil
(Item 19, WP 0060 00)
Pipe sealant (Item 25, WP 0060 00)
Gasket (Item 1, Table 7, WP 0062 00)
Gasket (Item 2, Table 7, WP 0062 00)
Bushing (Item 3, Table 7, WP 0062 00)
Two bushings (Item 4, Table 7, WP 0062 00)
Two O-rings (Item 5, Table 7, WP 0062 00)
Pressure regulator spring
(Item 6, Table 7, WP 0062 00)
Pressure regulator spring
(Item 7, Table 7, WP 0062 00)
Bushing (Item 8, Table 7, WP 0062 00)
Bypass valve spring
(Item 8, Table 7, WP 0062 00)
Two bushings (Item 9, Table 7, WP 0062 00)
Materials/Parts (Contd)
Three lockwashers
(Item 10, Table 7, WP 0062 00)
Lockplate (Item 11, Table 7, WP 0062 00)
Equipment Condition
Oil pump removed from engine (WP 0010 00).
DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE MANUAL
INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
FOR
M915, M915A1, M915A4, M916, M920 VEHICLES
P/N NTC400-3652-02
CUMMINS NTC-400 BIG CAM I DIESEL ENGINE
W/CONTAINER
P/N 11669835
CUMMINS NTC-400 BIG CAM III DIESEL ENGINE
W/CONTAINER
OIL PUMP
DISASSEMBLY, CLEANING AND INSPECTION, ASSEMBLY
INITIAL SETUP:


Back to Top