TM-9-2815-225-34-P
ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2005
TM-9-2815-225-34-P - Page 239 of 736
TM 9-2815-225-34&P
0023 00
0023 00-9/10 blank
OIL PUMP (Contd)
Figure 4. Oil Pump Assembly—Big Cam III.
13
12
19
19
23
4
16
17
15
14
11
10
8
9
7
6
5
21
3
1
22
20
25
26
27
18
2
END OF WORK PACKAGE
24
BIG CAM III (Contd)
Assembly (Contd)
14.
Using pipe sealant, install pipe plug (15) in oil pump cover (14). Tighten plug (15) 30 lb-ft
(41 N
•
m).
15.
Install coupling (16) and snapring (17) on oil pump driveshaft (10).
16.
Install woodruff key (9) in oil pump driveshaft (10).
17.
Using press, install oil pump drive gear (1) on oil pump driveshaft (10).
18.
Using a dial indicator, check oil pump driveshaft (10) end play. End play should be between
0.002–0.008 in. (0.05–0.20 mm).
19.
For oil pump installation, refer to WP 0042 00.
Back to Top
