TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 230 of 736

TM 9-2815-225-34&P

0022 00

0022 00-6

OIL PAN, DIPSTICK, OIL SUCTION TUBES, AND BREATHER TUBE (Contd)

END OF WORK PACKAGE

ASSEMBLY

NOTE

Perform steps 1 and 2 for Big Cam III only.

1.

Install oil suction tube (8) and clamp (9) on oil pan (12) and secure with washer (10) and nut (11).

2.

Install three pipe plugs (6), one spacer (13), and two plugs (7) on oil pan (12).

NOTE

Perform steps 3 and 4 for Big Cam I only.

3.

Install one spacer (3) and two plugs (2) in oil pan (1).

4.

Install strainer element (5) in oil pan (1) with four screws (4).

5.

For oil pans (1) and (12), dipstick, oil suction tubes (8), and breather tube installation, refer to

WP 0042 00.

Figure 4. Oil Pan Assembly.

1

2

3

4

5

2

8

6

9

10

11

12

13

7

6

7

6

BIG CAM I OIL PAN

(CAST ALUMINUM)

BIG CAM III OIL PAN

(STAMPED STEEL)