TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 333 of 736

TM 9-2815-225-34&P

0038 00

0038 00-5/6 blank

FUEL PUMP FRONT COVER AND GOVERNOR (Contd)

END OF WORK PACKAGE

ASSEMBLY (Contd)

18.

Install governor (14) in governor bushing (15) and rotate governor (14) until weights are open.

19.

Install weight-assist plunger (13) with small end facing governor weights. Install shims (12) and

new spring (11) in bore of governor (14).

20.

Using plunger protrusion checking tool and dial indicator, measure protrusion of weight-assist

plunger (13). Weight-assist plunger (13) protrusion should be 0.800 in. (20.32 mm). If weight-

assist plunger (13) protrusion is less than 0.800 in. (20.32 mm), add shims (12). If weight-assist

plunger (13) protrusion is more than 0.800 in. (20.32 mm), remove shims (12) or grind end of

weight-assist plunger (13). Repeat procedure until weight-assist plunger (13) protrusion is correct.

21.

Install fuel pump front cover and governor (Refer to WP 0040 00).

Figure 2. Fuel Pump Front Cover and Governor Assembly.

3

7

8

15

9

10

2

1

4

5

6

24

23

22

21

20

19

18

17

16

14

13

12

11