TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 408 of 736

TM 9-2815-225-34&P

0045 00

0045 00-4

ENGINE ACCESSORIES INSTALLATION (Contd)

FUEL PUMP AND FUEL LINES

1.

Install new gasket (2) and fuel pump (12) with compressor spider coupling (3) on air compressor (1).

NOTE

Perform steps 2 and 3 for Big Cam III.

2.

Position support bracket (9) on fuel pump (12) and air compressor (1) with three washers (10) and

bolts (11).

3.

Using air compressor wrench, install washer (14) and bolt (13) on fuel pump (12) and into air

compressor (1). Tighten bolt (13) finger-tight only.

NOTE

Perform step 4 only for Big Cam I.

4.

Using air compressor wrench, install support bracket (9) on fuel pump (12) and into air

compressor (1) with four washers (4) and bolt (5).

5.

Install new lockwasher (7) and bolt (6) on support bracket (9) and cylinder head (8).