TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 414 of 736

TM 9-2815-225-34&P

0046 00

0046 00-2

REMOVING ENGINE FROM MAINTENANCE STAND (Contd)

WARNING

Use extreme caution during disassembly or assembly; engine

components are heavy. Failure to comply may result in damage

to equipment or injury to personnel.

1.

Install lifting device on engine lifting brackets.

2.

Raise engine (1) just enough to take weight off maintenance stand.

WARNING

All personnel must stand clear during lifting operations. A

snapped chain or swinging or shifting load may result in injury

to personnel.

3.

Remove four mounting screws (2) securing engine (1) to maintenance stand.

CAUTION

Ensure engine is supported by cylinder block, flywheel housing,

or front support. Do not support engine on oil pan. Failure to

comply may result in damage to engine.

4.

Raise engine (1) from maintenance stand and support engine (1) on suitable blocks.