TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 410 of 736

TM 9-2815-225-34&P

0045 00

0045 00-6

ENGINE ACCESSORIES INSTALLATION (Contd)

FUEL PUMP AND FUEL LINES (Contd)

6.

Install fuel pump adapter (14) on fuel pump (29).

7.

Install two cylinder head adapters (8), fuel supply line (9), and fuel return line (10) on cylinder

head (7).

8.

Install fuel pump adapter (16) and fuel supply line (9) on fuel pump (29).

9.

Install fuel pump adapter (28) and fuel return lines (10) and (15) on fuel pump (29).

10.

Install fuel supply line (9) and fuel return line (10) on air aftercooler (6) with two washers (11),

new lockwashers (12), and screws (13).

11.

Install valve (27) and air supply line (26) on fuel pump (29).

12.

Install adapter (17) on air aftercooler (6).

13.

Install bracket (25) and air supply line (26) with screw (18), washer (24), new lockwasher (23),

and nut (22) on air aftercooler (6).

NOTE

Perform steps 14–16 for Big Cam I equipped with air signal

attenuator (ASA) air tank.

14.

Install ASA air tank (1) with washer (19), new lockwasher (20), and screw (21) on air aftercooler

(6).

15.

Install ASA hose fittings (2) on ASA air tank (1).

16.

Install air aftercooler elbow (5) on air aftercooler (6).

17.

Install two air supply hoses (4) and four hose clamps (3) on ASA air tank (1).