TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 444 of 736

TM 9-2815-225-34&P

0048 00

0048 00-10

BIG CAM III ENGINE INSTALLATION (Contd)

23.

Install engine electrical harness transformer/rectifier negative lead (16) on alternator

transformer/rectifier negative terminal (14) with alternator terminal washer (7) and nut (6).

24.

Install engine electrical harness transformer/rectifier positive lead (8) on alternator

transformer/rectifier positive terminal (15) with alternator terminal washer (5) and nut (4).

25.

Install engine electrical harness negative lead (3) on alternator negative terminal (10) with

alternator terminal washer (2) and nut (1).

26.

Install engine electrical harness positive lead (9) on alternator positive terminal (11) with

alternator terminal washer (12) and nut (13).

27.

Install two drive belts (21) on alternator (22), drive pulley (25), and crankshaft pulley (26).

28.

Tighten jamnut (17) on adjusting rod (24) until tension on drivebelts (21) is 110 lbs (50 kg).

29.

Tighten jamnut (23).

30.

Tighten two alternator mounting bracket nuts (20) (hidden) and screws (19).

Figure 13. Alternator Electrical Connections Installation.

1

2

3

4

5

6

9

10

7

11

12

13

14

15

16

8