TM-9-2815-225-34-P
ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2005
TM-9-2815-225-34-P - Page 442 of 736
TM 9-2815-225-34&P
0048 00
0048 00-8
BIG CAM III ENGINE INSTALLATION (Contd)
NOTE
Thread cables and wires through grommet before installing
wires.
19.
Install 12V power lead (7) and two engine harness leads (5) and (6) on 12V power stud (2) with
12V power stud washer (3), nut (4), and grommet (1).
20.
Install pressure harness lead (16) and fan solenoid lead (15) on fan temperature switch (17)
terminal B with fan temperature switch washer (9) and screw (10).
21.
Install pressure harness lead (13) and engine harness lead (14) on fan temperature switch (17)
terminal A with fan temperature switch washer (12) and screw (11).
22.
Connect temperature sensor electrical connector (8) to temperature sensor (18).
Figure 11. 12V Harness Leads Installation.
1
7
6
5
4
3
2
Back to Top
