TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 440 of 736

TM 9-2815-225-34&P

0048 00

0048 00-6

BIG CAM III ENGINE INSTALLATION (Contd)

13.

Connect fuel pump pressure sensor electrical connector (6) to fuel pump pressure sensor (5).

14.

Install fuel solenoid electrical harness lead (4) on fuel solenoid (1) with fuel solenoid terminal

lockwasher (2) and nut (3).

15.

Install A/C electrical harness ground lead (16) and ground jumber cable (17) on engine (19) with

two new A/C electrical harness ground lead starwashers (15), and screw (18).

16.

Install battery ground cable (27), starter electrical harness lead no. 83 (26) and ground jumber

cable (17) on starter ground terminal (25) with new starter ground terminal lockwasher (8) and

nut (7).

17.

Install battery positive cable (10) and three starter electrical harness leads no. 202 (12), no. 82

(13), and no. 421 (14) on starter positive terminal (24) with new starter positive terminal

lockwasher (11) and nut (9).

18.

Install starter electrical harness lead no. 74 (22) on starter S-terminal (23) with starter S-terminal

lockwasher (20) and nut (21).

Figure 9. Fuel Solenoid and Pressure Sensor Wiring Installation.

1

2

3

4

5

6