TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 446 of 736

TM 9-2815-225-34&P

0048 00

0048 00-12

BIG CAM III ENGINE INSTALLATION (Contd)

31.

Connect control valve module electrical harness (6) to transmission electrical harness (2).

32.

Install transmission electrical harness (2) on transmission (1) with transmission electrical harness

clamp (3), two washers (5), screw (4), and nut (7).

33.

Connect output speed sensor electrical connector (8) to output speed sensor (9).

34.

Connect turbine speed sensor electrical connector (12) on turbine speed sensor jumper harness (13).

35.

Connect engine speed sensor electrical connector (11) to engine speed sensor (10).

36.

Install transmission oil temperature sensor electrical connector (14) on transmission oil

temperature sensor (15) with transmission oil temperature sensor electrical connector washer (16)

and nut (17).

Figure 18. Engine Speed and Turbine Sensors

Installation.

Figure 19. Transmission Oil Temperature Sensor

Installation.

Figure 16. Transmission

Electrical Harness Installation.

Figure 17. Output Speed Sensor Installation.

7

5

1

2

3

4

5

6

8

9

11

1

2

12

13

10

17

16

15

14