TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 454 of 736

TM 9-2815-225-34&P

0048 00

0048 00-20

BIG CAM III ENGINE INSTALLATION (Contd)

65.

Install A/C compressor (5) on mounting bracket (27) with two A/C compressor mounting bracket

bolts (26), washers (24), and new locknuts (23).

66.

Install A/C compressor adjusting rod (15) on front cover (16) with A/C compressor adjusting rod

bolt (18), two washers (13), and new locknut (12).

67.

Install A/C drive belt (19) on A/C clutch pulley (25) and accessory drive pulley (17).

68.

Tighten two jam nuts (11) on A/C compressor adjusting rod (15) to obtain 0.50 in. (12.7 mm)

A/C drive belt (19) deflection.

69.

Install A/C compressor hose (4), clamp (1), screw (2), washer (22), and new locknut (21) on top of

engine (20).

70.

Install A/C compressor lines (3), two clamps (8) and (14), washers (10), and screws (9) on A/C

compressor (5).

71.

Connect A/C compressor clutch electrical connector (7) to engine wiring harness (6).