TM-9-2815-225-34-P
ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2005
TM-9-2815-225-34-P - Page 462 of 736
TM 9-2815-225-34&P
0048 00
0048 00-28
BIG CAM III ENGINE INSTALLATION (Contd)
95. Fill cooling system with coolant to specified level (TM 9-2320-283-10).
96. Fill transmission with transmission oil to specified level (TM 9-2320-283-10).
97. Fill engine crankcase with engine oil to specified level (TM 9-2320-283-10).
98. Fill steering system with steering fluid to specified level (TM 9-2320-283-10).
99. Install negative battery cable (1) on battery (4) and connect two negative battery cable clamps (2)
on two negative battery cable post (3).
100. Install brush guard and spotter mirrors (TM 9-2320-283-20).
101. Install bumper and towing eyes (TM 9-2320-283-20).
102. Install transmission oil cooler lines (TM 9-2320-283-20).
103. Close air reservoir draincocks (TM 9-2320-283-20).
104. Install upper radiator fan shroud (TM 9-2320-283-20).
105. Install fenders (TM 9-2320-283-20).
106. Install grill shell (TM 9-2320-283-20).
107. Install horn wire (TM 9-2320-283-20).
CAUTION
Always perform break-in procedures for a new or repaired
engine to prevent premature bearing and ring failure.
108. Perform engine testing (WP 0047 00).
END OF WORK PACKAGE
Figure 47. Battery Cable Installation.
~
1
4
3
2
Back to Top
