TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 468 of 736

TM 9-2815-225-34&P

0049 00

0049 00-6

BIG CAM I ENGINE INSTALLATION (Contd)

30.

Connect engine harness electrical connectors (1) at firewall (2).

31.

Install electrical harness bracket (4) on engine (5) with screw (3). Tighten screw (3) 15–20 lb-ft

(20–27 N

•

m).

32.

Connect air compressor line (6) to air compressor (7).

33.

Connect fuel line (10) to fuel filter and damper (11).

34.

Connect tachometer shaft assembly (15) to tachometer (14).

35.

Install ether quick start kit bracket (8), on engine with two clamps (13) and (16) and bracket nut

(17) and screw (12). Tighten nut (17) and screw (12) 15–20 lb-ft (20–27 N

•

m).

36.

Install tachometer shaft assembly (15) on ether quick start kit bracket (8) with new plastic tie (9).

37.

Install speedometer shaft assembly (22) on fuel return line (20) with new plastic tie (21).

38.

Connect fuel return line (20) to fuel rail male branch tree (19).

39.

Connect air compressor hose (23) to air compressor line (24).

40.

Connect air compressor lines (24) and (25) to air compressor line T-adapter (18).

Figure 6. Electrical Engine Harness Installation.

1

2

3

4

5