TM-9-2815-225-34-P
ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2005
TM-9-2815-225-34-P - Page 477 of 736
TM 9-2815-225-34&P
0050 00
0050 00-3
BIG CAM III MODIFICATION KIT INSTALLATION INSTRUCTIONS (Contd)
ENGINE PREPARATION
NOTE
All material removed and not reused during installation will be
returned to stock for disposition in accordance with AR 725-50.
1.
Remove alternator, alternator drive belt, and alternator mounting bracket from Big Cam III
engine (2). Refer to WP 0008.
2.
Install Big Cam I alternator mounting bracket (3) on Big Cam III engine (2) with three bolts (1).
Tighten bolts (1).
3.
Install Big Cam I alternator and drive belt on Big Cam III engine. Refer to WP 0049.
4.
Remove exisiting Big Cam I engine from vehicle. Refer to WP 0007.
BIG CAM III INSTALLATION PROCEDURES
1.
Drain oil from Big Cam III bypass filter (4) and remove oil bypass filter element from bypass filter (4).
2.
Remove two elbows (5) from oil bypass filter (4).
3.
Install two plugs (6) on Big Cam III oil bypass filter (4).
Figure 1. Big Cam I Alternator Bracket Installation on Big Cam III Engine.
Figure 2. Oil Bypass Filter (Big Cam III).
Figure 3. Oil Bypass Plug
Installation (Big Cam III).
2
1
3
4
5
4
6
Back to Top
