TM-9-2815-225-34-P
ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2005
TM-9-2815-225-34-P - Page 476 of 736
TM 9-2815-225-34&P
0050 00
0050 00-2
BIG CAM III MODIFICATION KIT INSTALLATION INSTRUCTIONS (Contd)
GENERAL INFORMATION
NOTE
The following guidelines apply for using the Big Cam III
engines in other than M915A1 vehicles.
1.
Installing the Big Cam III requires that you retain and use the following components from the
BIG Cam I:
•
Big Cam I flywheel housing
•
Big Cam I flywheel
•
Big Cam I lower alternator bracket
NOTE
It is recommended that you retain the Big Cam I engine for use
of other miscellaneous parts.
2.
Refer to table 1 for parts which are required to complete the conversion.
Table 1. Parts Required for Big Cam III Coversion.
NAME
PART NUMBER
NATIONAL STOCK NUMBER
QUANTITY
Seal ring
2D6507
1
Seal
5P3881
1
Pipe plug
144027
2
Pipe plug
444632
1
Plug button
142083
1
Back to Top
