TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 458 of 736

TM 9-2815-225-34&P

0048 00

0048 00-24

BIG CAM III ENGINE INSTALLATION (Contd)

82.

Install adapter duct (3) on air cleaner box (4) with four reinforcement plates (7), ten adapter duct

screws (1), washers (5) and (2), and new locknuts (6).

83.

Connect air duct door spring (12) on air duct door (9) and firewall (4).

84.

Install air cleaner housing (8) on adapter duct (3) with six air cleaner housing washers (10) and

new locknuts (11).

85.

Install indicator tube (19) and elbow (18) on air cleaner housing (8).

86.

Install air vent hose (17), two air vent hose clamps (16) on air duct support bracket (20) with four

air cleaner housing bracket screws (22), washers (23), and new locknuts (24). Tighten clamps (16).

87.

Install air vent tube (13) on air duct support bracket (20) with vent tube screw (14), washer (15),

and locknut (21).

88.

Install air cleaner duct assembly (29) and three clamps (28) on turbocharger outlet (30), outlet

elbow (27), and air cleaner housing (8). Tighten clamps (28).

89.

Install outlet elbow (27) on air chamber (31).

90.

Install new air cleaner element (26) and three clamps (25) on air cleaner housing (8). Tighten

clamps (25).

Figure 41. Air Cleaner Housing Installation.

1

2

12

4

5

6

7

8

9

10

11

3

3