TM-9-2990-205-34-P
TURBOSUPERCHARGER MODEL 5HDR
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 2005
TM-9-2990-205-34-P - Page 35 of 128
TM 9--2990--205--34&P
0007 00--1
CLEANING THE TURBO BEFORE DISASSEMBLY
0007 00
THIS WORK PACKAGE COVERS:
Cleaning
INITIAL SETUP:
Materials/Parts
Hard bristle brush (item 5, WP 0016 00)
Plastic scraper (item 8, WP 0016 00)
Goggles (item 6, WP 0016 00)
Rubber gloves (item 7, WP 0016 00)
Solvent (item 3, WP 0016 00)
Rag, wiping, cotton (item 1, WP 0016 00)
Equipment Condition
Turbo on workbench
NOTE
Before beginning the disassembly of the turbo, thoroughly clean and degrease exterior sur-
faces using the procedure outlined below.
CLEANING
1. Drain bearing housing of lubricant from oil drain tube (2).
2. Tape oil inlet port (1), oil drain tube opening (2), and threaded hose adapters (3).
03i454m
2
1
3
Back to Top
