TM-9-2990-205-34-P
TURBOSUPERCHARGER MODEL 5HDR
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 2005
TM-9-2990-205-34-P - Page 40 of 128
TM 9--2990--205--34&P
0008 00--4
DISASSEMBLY OF THE TURBO INTO COMPONENT PARTS -- CONTINUED
0008 00
3. Removal of the Compressor Wheel.
a. Place a 1--1/8 inch 12 point socket and bar (1) on the turbine wheel hub and hold in position.
b. Using 3/4 inch box end wrench (2), remove and discard compressor wheel lock nut (3).
CAUTION
Use care when removing the compressor wheel to prevent damage to the wheel blades. DO
NOT attempt to pry the compressor wheel off the shaft. If the wheel is difficult to remove,
work it gently back and forth with your fingers until loose.
c.
Remove compressor wheel (4).
1
4
3
2
03i459m
Back to Top
