TM-9-2990-205-34-P
TURBOSUPERCHARGER MODEL 5HDR
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 2005
TM-9-2990-205-34-P - Page 44 of 128
TM 9--2990--205--34&P
0008 00--8
DISASSEMBLY OF THE TURBO INTO COMPONENT PARTS -- CONTINUED
0008 00
7. Removal of the Shield, Bearing Housing, Turbine Wheel and Shaft Assembly and Backplate.
a. Scribe alignment marks on flanges of bearing--housing (1) and turbine housing (2).
03i465m
ALIGNMENT MARKS
1
2
b. Straighten tabs on locking plates (3).
c.
Remove eight cap screws (4).
d. Remove and discard four locking plates.
e. Remove shield (5).
NOTE
You may have difficulty separating the bearing housing from the turbine housing. If so, tap the
turbine housing lightly with a soft mallet while lifting the bearing housing.
03i466m
4
5
3
Back to Top
