TM-9-2990-205-34-P
TURBOSUPERCHARGER MODEL 5HDR
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 2005
TM-9-2990-205-34-P - Page 41 of 128
TM 9--2990--205--34&P
0008 00--5
DISASSEMBLY OF THE TURBO INTO COMPONENT PARTS -- CONTINUED
0008 00
4. Removal of Compressor Wheel Shims, Retaining Ring, and Flinger Sleeve Insert.
a. Place turbo on turbine housing studs (1) with improvised support block (2) under the turbine wheel. See WP
0004 00.
NOTE
The support block prevents the turbine wheel and shaft assembly from dropping into the
turbine housing during disassembly and possibly damaging the wheel blades.
b. Remove and discard compressor wheel shims (3).
NOTE
Compressor wheel shims may stick to the back of the compressor wheel.
2
1
3
03i460m
Back to Top
