TM-9-2990-205-34-P
TURBOSUPERCHARGER MODEL 5HDR
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 2005
TM-9-2990-205-34-P - Page 36 of 128
TM 9--2990--205--34&P
0007 00--2
CLEANING THE TURBO BEFORE DISASSEMBLY -- CONTINUED
0007 00
WARNING
Cleaning solvent is flammable! Use only in well ventilated areas. Keep away from flame,
sparks, or heat. Avoid contact with eyes, mouth, or skin. Wear rubber gloves to prevent skin
irritation.
CAUTION
Never use a wire brush or steel blade scraper.
3. Using bristle brush, plastic scraper, and solvent, remove dirt, oil, and any other contaminants from all exterior
surfaces.
4. Use cloth moistened with solvent to clean hard to reach areas.
WARNING
Line pressure for compressed air used for cleaning shall not exceed 30 psi. Wear appropriate
eye protection and gloves. Never direct the compressed air stream at another person.
5. Blow turbo dry with compressed air.
END OF WORK PACKAGE
Back to Top
