TM-9-2990-205-34-P
TURBOSUPERCHARGER MODEL 5HDR
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 2005
TM-9-2990-205-34-P - Page 75 of 128
TM 9--2990--205--34&P
0012 00--13
ASSEMBLY AND OPERATIONAL TESTING -- CONTINUED
0012 00
9. Installation of Mounting Legs and Oil Drain Tube.
NOTE
The mounting leg on the same side as the turbine housing exhaust inlet is referred to as the
“inner” mounting leg and must be installed first.
a. Install inner mounting leg (1) and secure with two cap screws and new lockwashers (2).
b. Torque cap screws to 230 to 250 lb--in (25.99 to 28.25 N
S
m).
c.
Install new gasket (3) and oil drain tube (4). Secure with two cap screws and new lockwashers (5).
NOTE
The oil drain tube must pass through the opening in the INNER leg. The oil drain tube must
always be on the same side as the turbine housing exhaust inlet.
d. Torque cap screws to 230 to 250 lb--in (25.99 to 28.25 N
S
m) using crowfoot attachment (6).
03i500m
TURBINE EXHAUST
INLET
45
3
6
2
1
Back to Top
