TM-9-2990-205-34-P
TURBOSUPERCHARGER MODEL 5HDR
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 2005
TM-9-2990-205-34-P - Page 71 of 128
TM 9--2990--205--34&P
0012 00--9
ASSEMBLY AND OPERATIONAL TESTING -- CONTINUED
0012 00
8. Installation of Turbine Housing, Shield, Preformed Packing and Compressor Cover.
NOTE
Table 3--1 provides information for proper indexing of the turbine housing and compressor
cover according to engine model and mounting location. Table 3--1 applies to both “clean air”
and standard turbosuperchargers.
a. Place turbine housing (5) on studs.
b. Install bearing housing with compressor and turbine wheels (6) in turbine housing.
c.
Align marks (7) scribed in housing flanges during disassembly. If alignment marks cannot be located, or if
either housing has been replaced, refer to Table 3--1 to determine proper housing positions.
03i496m
3
5
6
7
4
2
1
Back to Top
