TM-9-2990-205-34-P
TURBOSUPERCHARGER MODEL 5HDR
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 2005
TM-9-2990-205-34-P - Page 61 of 128
TM 9--2990--205--34&P
REPAIR OF COMPONENT PARTS -- CONTINUED
0011 00
2. Repair of the Turbine Housing.
a. Smooth small nicks or raised metal using a fine hand file.
b. Remove and discard loose or damaged studs (1) using stud remover and setter.
c.
Using stud remover and setter, install coarse thread end of new stud, part number C157415, to a setting
height of 1.00 inch (25.4 mm).
d. Repair damaged threads using a 3/8--16NC thread tap.
03i486m
1
3. Repair of the Oil Drain Tube and Shield.
Minor bends in the oil drain tube and shield can be straightened as long as the integrity of the part remains intact.
4. Repair of the Bearing Housing, Mounting Legs, and Turbine Backplate.
Slight nicks on the mating surfaces of these components can be smoothed using a hand file. Re--tap threaded
holes, if damaged.
END OF WORK PACKAGE
0011 00--3/4 blank
Back to Top
