TM-9-2990-205-34-P

TURBOSUPERCHARGER MODEL 5HDR

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 2005
TM-9-2990-205-34-P

  TM-9-2990-205-34-P - Page 64 of 128

TM 9--2990--205--34&P
0012 00--2
ASSEMBLY AND OPERATIONAL TESTING -- CONTINUED
0012 00
ASSEMBLY
1. Installation of Metal Seal Rings on Turbine Wheel and Shaft Assembly and Flinger Sleeve.
a. Place installing sleeve (1) over turbine wheel and shaft assembly (2).
b. Install new metal seal ring (3) by sliding over installing sleeve into ring groove (4).
c.
Remove ring installing sleeve.
d. Place installing sleeve over new flinger sleeve (5).
e. Install two new metal seal rings (6) by sliding over installing sleeve into ring groove (7).
f.
Remove installing sleeve.
03i505m
1
2
3
4
6
7
5


Back to Top