TM-9-2990-205-34-P
TURBOSUPERCHARGER MODEL 5HDR
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 2005
TM-9-2990-205-34-P - Page 76 of 128
TM 9--2990--205--34&P
0012 00--14
ASSEMBLY AND OPERATIONAL TESTING -- CONTINUED
0012 00
e. Install outer mounting leg (1) and secure with two cap screws and new lockwashers (2).
f.
Torque lockwashers to 230 to 250 lb--in (25.99 to 28.25 N
S
m).
03i501m
1
2
TURBO
ASS’Y
10. Installation of Compressor Cover Inlet and Outlet Adapters and Preformed Packings.
NOTE
This procedure applies to “clean air” turbo only.
a. Install new preformed packings (1) and (2) on compressor cover inlet adapter (3) and outlet adapter (4).
NOTE
The inlet adapter is slightly larger than the outlet adapter and requires the larger preformed
packing.
b. Install adapters with preformed packings in compressor cover (5).
c.
Using deep well sockets, torque adapters to 55 to 65 lb--in (6.215 to 7.345 N
S
m).
03i502m
5
2
4
3
1
Back to Top
