TM 9-6920-430-14
b. Battery Recharging Procedure.
NOTE
In the steps below, if a proper indication is not obtained, refer to troubleshooting pro-
cedures contained in table 3-4 (page 3-60).
(1) Set the POWER ON/OFF switch (6) to ON. Observe that the POWER lamp (7) illuminates.
NOTE
A battery wilt not charge if its corresponding amber CHARGE indicator bulb is
burned out.
(2) Press the five charge amber lens assemblies (8) and TEST green lamp assembly (9).
Observe that the associated lamps illuminate.
2-24
Change 4