TM-9-6920-430-14
COOLANT RECHARGING UNIT, TRAINING GUIDED MISSILE SYSTEM M80 AND CHARGER, BATTERY PP-7309/T
TECHNICAL MANUAL; OPERATOR’S AND ORGANIZATIONAL DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL
AUGUST 1980
TM-9-6920-430-14 - Page 83 of 180
TM 9-6920-430-14
(7) Remove the inlet port protective cap (22) from the cross fitting using a
l/2-inch wrench to hold and 9/16-inch to loosen.
(8) Remove the protective plug (23) from the inlet flexible hose fitting (24).
Connect the inlet port (25) of the cross fitting to the inlet flexible hose fitting (24) using a
l/2-inch wrench to hold and a 9/16-inch wrench to tighten. Connect protective plug (23)
to protective cap (22) finger tight.
(9) Remove the protective cap from the cross fitting outlet port (26) using a
l/2-inch wrench to hold and a 9/16-inch wrench to loosen.
(10) Open OUTLET BLEED valve two turns counterclockwise, then fully close
valve.
Change 1 3-23
Back to Top
