LO-9-2350-247-12
CARRIER, CARGO TRACKED, 6-TON: M548A1 AND M548A3; CARRIER, ELECTRONIC WARFARE SYSTEMS, TRACKED, 6-TON: M1015A1
LUBRICATION ORDER
JULY 1994
LO-9-2350-247-12 - Page 21 of 43
LUBRICATION ORDER
LO 9-2350-247-12
8 JULY 1994
(Supersedes LO 9-2350-247-12, March 1982)
KEY
REFILL
EXPECTED TEMPERATURES*
LUBRICANTS/COMPONENTS
CAPACITY
INTERVALS
(APPROX)
+5°F to +120°F
+40°F to -60°F
GAA (MIL-G-10924)
GREASE, AUTOMOTIVE
As Required
AND ARTILLERY
Steering Control
All Temperatures
S - 150 Hours,
Bearing
1,500 Miles
Foot Brake Pedal
or Semi-annually
Linkage
For Arctic Operation Refer to FM 9-207
NOTES
WARNING NOTE
Dry cleaning solvent PD-680 is toxic and flam- When grease fittings will not accept GAA, notify
mable. Death or injury may result. Always use in unit maintenance.
an open area with good air flow, away from sparks,
heat, or flames. Wear protective goggles and
2. FOOT BRAKE PEDAL LINKAGE (M548A3). Every
gloves. Do not breathe vapors. Avoid contact with
1,500 miles or semi-annually, lubricate linkage with
skin, eyes, and clothes. If you get dizzy while using
grease (GAA) through fitting. Use grease gun with
solvent, breathe fresh air and get medical help. If
flexible adapter.
solvent gets on hands, wash them. If solvent gets
in eyes, flush eyes with freshwater and get medi-
cal help immediately. Keep fire extinguisher
nearby.
NOTE
CIean grease fittings with dry cleaning solvent
PD-680, Type III, or equivalent) prior to lubrica-
tion. Check/lubricate grease fitting points after
washing or fording.
1. STEERING CONTROL BEARINGS (M548A3).
Every 1,500 miles or semi-annually, lubricate bearings
with grease (GAA) through fitting at each end of
steering control. Use grease gun with flexible adapter.
Remove forward battery under driver’s seat (TM 9-
2350-247-20).
Card 21 of 40
Back to Top
