LO-9-2350-247-12
CARRIER, CARGO TRACKED, 6-TON: M548A1 AND M548A3; CARRIER, ELECTRONIC WARFARE SYSTEMS, TRACKED, 6-TON: M1015A1
LUBRICATION ORDER
JULY 1994
LO-9-2350-247-12 - Page 27 of 43
LUBRICATION ORDER
LO 9-2350-247-12
8 JULY 1994
(Supersedes LO 9-2350-247-12, March 1982)
KEY
REFILL
EXPECTED TEMPERATURES*
LUBRICANTS/COMPONENTS
CAPACITY
INTERVALS
(APPROX)
+5°F to +120°F
+40°F to -60°F
OE/HDO (MIL-L-2104D)
LUBRICATING OIL,
3.5 qt. or 7 pt.
OE/HDO-15/40
OEA
W - Weekly
OR OEA (MIL-L-46167D)
INTERNAL COMBUSTION
ENGINE
S - Semi-annually
Final Drives
or Every
1,500 Miles
For Arctic Operation Refer to FM 9-207
NOTES
1. FINAL DRIVES. Weekly, check oil in both final
c. Inspect drain plugs and oil for metallic
drives for level between ADD and FULL marks on
particles. If metal chips are found, notify direct
gauge rod. Add applicable OE/HDO or OEA in accor- support maintenance.
dance with Temperature Key Chart, as required.
d. Clean and install drain plug.
NOTE
Drain only when hot after operation.
e. Fill each final drive with OE/HDO or OEA, as
applicable, adding the proper amount to bring
Do not substitute hydraulic fluid for OE/HDO or
level between the ADD and FULL marks on
OEA. Red dye may have been added to some final
gauge rod.
drives to aid in detection of leaks.
2. FINAL DRIVE OIL DRAIN. Drain final drives every
1,500 miles, or semi-annually.
a. Place a suitable container under final drive
housing.
b. Remove drain plug from final drive housing
and drain oil into container.
Card 27 of 40
Back to Top
