LO-9-2350-247-12
CARRIER, CARGO TRACKED, 6-TON: M548A1 AND M548A3; CARRIER, ELECTRONIC WARFARE SYSTEMS, TRACKED, 6-TON: M1015A1
LUBRICATION ORDER
JULY 1994
LO-9-2350-247-12 - Page 37 of 43
LUBRICATION ORDER
LO 9-2350-247-12
8 JULY 1994
(Supersedes LO 9-2350-247-12, March 1982)
KEY
EXPECTED
REFILL
TEMPERATURES*
LUBRICANTS
CAPACITY
Above
+40°F
0°F
INTERVALS
(APPROX)
32°F
to
to
-10°F
-65°F
PL-M (MIL-L-3150)
LUBRICATING OIL,
As Required
GENERAL PURPOSE
AN - Annually
Medium
or Every
1,500 Miles
PL-S (VV-L-800)
LUBRICATING OIL,
PL-M
PL-S
PL-S
GENERAL PURPOSE
S - 150 Hours,
Special
1,500 Miles
Machine Gun Mount
As Required
or Semi-annually
CLP (MIL-L-63460)
CLEANER, LUBRICANT
AND PRESERVATIVE
As Required
CLP
CLP
CLP
GAA (MIL-G-10924)
GREASE AUTOMOTIVE
AND ARTILLERY
As Required
All Temperatures
Towing Pintle
*For Arctic Operation Refer to FM 9-207
NOTES
1. *CLP is an alternate for PL-M and PL-S.
NOTE
Late model towing pintles do not have grease
WARNING
fittings and do not require lubrication.
Dry cleaning solvent PD-680 is toxic and flam-
mable. Death or injury may result. Always use in an
2. TOWING PINTLE. Every 1,500 miles or annually,
open area with good air flow, away from sparks,
lubricate pintle through two fittings with grease (GAA).
heat, or flames. Wear protective goggles and gloves.
Towing pintle is at rear of carrier.
Do not breathe vapors. Avoid contact with skin,
eyes, and clothes. If you get dizzy while using
solvent, breathe fresh air and get medical help. If
solvent gets on hands, wash them. If solvent gets
in eyes, flush eyes with fresh water and get medical
help immediately. Keep fire extinguisher nearby.
NOTE
Clean grease fittings with dry cleaning solvent (PD-
680, Type Ill, or equivalent) prior to lubrication.
Check/lubricate grease fitting points after
washing or fording.
Card 37 of 40
Back to Top
