MWO-5-2350-262-35-2
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-2 - Page 28 of 33
MWO 5-2350-262-35-2
2-23
8.
Release pressure from bottles (4 and 6) by untightening lids (3 and 7).
9.
Transfer any solution from EMPTY bottle (6) back into FILLED bottle (4).
e. Purging MCU:
CAUTION
Do not use compressed air to purge MCU or coolant umbilical.
High pressure will damage seals.
NOTE
Steps 1 through 6 below apply to Figure 2-31.
1.
Connect black tube (2) on release tether (1) to black connector (4) on lid (6) of EMPTY bottle (7).
2.
Connect clear tube (11) on release tether (1) to white connector (10) on lid of FILLED bottle (8).
3.
Connect pump (3) to white connector (5) on lid (6) of EMPTY bottle (7).
2
1
5
4
11
10
9
8
7
6
3
Figure 2-31.
Charge/Purge Kit for Purging MCU.
Back to Top
