MWO-5-2350-262-35-2
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-2 - Page 21 of 33
MWO 5-2350-262-35-2
2
-
16
NOTE
Step 9 below applies to Figure 2-19.
9.
Install the access cover (12475724) (1) on the MCU base bracket (6) with the angled and open end facing the
left side of the vehicle using four cap screws (B1821BH038C150N) (2), hex nuts (12387305-9) (3) and lock
washers (12387272-46) (4) and eight flat washers (12387279-14) (5).
Figure 2-19.
MCU Access Cover Installation.
NOTE
Step 10 below applies to Figure 2-20.
10. Install the coolant umbilical guard (12475737) (4) to the left outside of the radio equipment case (1) behind
the driver’s compartment with three flat washers (MS27183-18) (2) and machine bolts (B1821BH050C125L)
(3).
2, 3
1
2, 3, 4, 5
6
1
4
LEFT OUTSIDE
OF VEHICLE
Figure 2-20.
Coolant Umbilical Guard Installation.
11. Re-connect the negative battery ground cable per TM 5-2350-262-20-1.
Back to Top
