MWO-5-2350-262-35-2
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-2 - Page 22 of 33
MWO 5-2350-262-35-2
2-17
SECTION IV – SYSTEM CHARGING & PURGING PROCEDURES
NOTE
Use Charge/Purge Kit – MCU Cooling (4700) for procedures in this section.
Step 1 and 2 below apply to Figure 2-21.
a. Mixing Coolant:
1.
Pour tap water to “30% concentration fill line” on bottle (4700) (2) and add propylene glycol (MIL-P-83800) (1)
to “fill propylene glycol to here” line on bottle (2).
1
2
Figure 2-21.
Mixing Coolant Components.
2.
Cap bottle (2) and shake well to mix.
b.
Charging Microclimate Cooling Garment (MCG):
NOTE
Step 1 below applies to Figure 2-22.
1.
Connect latch tether (2) to MCG (2-11-001-4, 2-11-001-5, or 2-11-001-6) (1).
2
1
2
Figure 2-22.
Latch Tether for Charging MCG.
Back to Top
