MWO-5-2350-262-35-2
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-2 - Page 14 of 33
MWO 5-2350-262-35-2
2-9
CAUTION
Avoid crimping coolant umbilical.
NOTE
Steps 7 through 9 below apply to Figure 2-9.
7.
Remove the NBC assembly (6) from driver’s compartment sidewall bracket (2) by removing four machine
bolts (4) and flat washers (5). Retain NBC assembly, machine bolts and flat washers for later use.
8.
Install the umbilical BCA (1) to the top of the BCA bracket (12475751) (3) with two lock washers (MS35338-
42) (7) and pan head machine screws (MS35206-245) (8).
9.
Install the umbilical BCA bracket (3) behind the NBC assembly (6) to the driver’s compartment sidewall
bracket (2) with four machine bolts (4) and flat washers (5) retained in step c.7 above.
1
3
4, 5
7, 8
2
6
Figure 2-9.
MCU Coolant Umbilical BCA Installation.
Back to Top
