MWO 5--2350--262--35--4
4--22
SECTION III INSTALLATION OF NEW FORWARD RIGHT MANIFOLD
ASSEMBLY -- CONTINUED
4--10 INTERCONNECTION OF NEW FORWARD RIGHT MANIFOLD ASSEMBLY --
CONTINUED
NOTE
Steps c through e below apply to Figure 4--12 and Table 4--2.
c.
Remove hose, band marker 13214E2495--2 and install hose, 13214E2495--8, (9) between port 11A of
forward right manifold assembly (4) and port 11 of #1 right suspension unit.
d.
Remove hose, band marker 13214E2495--5 and install hose, 13214E2495--9, (8) between port 11B of
forward right manifold assembly (4) and circuit 11 bulkhead fitting.
e.
Connect remaining tagged hoses (1 through 3) and (5 through 7) removed from old forward right
manifold to ports of new forward right manifold assembly (4) as listed in Table 4--2.
Figure 4--12. Installation and Interconnection of New Forward Right Manifold Assembly