MWO 5--2350--262--35--4
4--14
SECTION III INSTALLATION OF NEW FORWARD RIGHT MANIFOLD
ASSEMBLY
4--6
REMOVAL OF EXISTING FORWARD RIGHT MANIFOLD ASSEMBLY
NOTE
Steps a and b below apply to Figure 4--7.
a.
Identify and tag all hoses connected to forward right manifold.
b.
Remove existing forward right manifold per TM 5--2350--262--20--2, Hydraulic Front Manifolds and
Fittings Replacement. Discard two locking screws. Note orientation of ports 9, 3R, and 11 on front of
manifold.
Figure 4--7. Existing Forward Right Manifold Assembly (Being Replaced)