MWO-5-2350-262-35-4

ARMORED COMBAT EARTHMOVER (ACE), M9

MODIFICATION WORK ORDER

MWO-5-2350-262-35-4 - Page 122 of 207

MWO 5--2350--262--35--4

4--19

SECTION III INSTALLATION OF NEW FORWARD RIGHT MANIFOLD

ASSEMBLY -- CONTINUED

4--9

INSTALLATION OF NEW FORWARD RIGHT MANIFOLD ASSEMBLY

NOTE

Steps a and b below apply to Figure 4--10.

a.

If necessary to provide wrench clearance, loosen (but do not remove) valve coils on new forward right

manifold assembly and slide away from manifold assembly.

b.

Install new forward right manifold assembly, 12496942, (1), in same manner as previously installed

forward right manifold, using two locking screws, B1821BH038C250L, (3) and two flat washers,

10910174--3, (2). Refer to TM 5--2350--262--20--2, Hydraulic Front Manifolds and Fittings Replacement,

and to Figure 4--10. If necessary, valve coils may be loosened and slid away from the manifold to

provide wrench clearance. Do not remove coil entirely.

Figure 4--10. Installation of New Forward Right Manifold Assembly