MWO-5-2350-262-35-4

ARMORED COMBAT EARTHMOVER (ACE), M9

MODIFICATION WORK ORDER

MWO-5-2350-262-35-4 - Page 118 of 207

MWO 5--2350--262--35--4

4--15

SECTION III INSTALLATION OF NEW FORWARD RIGHT MANIFOLD

ASSEMBLY -- CONTINUED

4--7

ASSEMBLY OF HDC FORWARD RIGHT MANIFOLD

CAUTION

Assembly should be performed in a clean environment and protective dust covers or

caps should be installed on all openings to prevent contamination. Dirt can damage

parts and cause malfunctions.

CAUTION

When securing aft manifold in vice, exercise extreme care not to mar any surfaces or

damage components.

CAUTION

Do not over torque. Failure to comply may result in damage to equipment.

NOTE

Steps a through d applies to Figure 4--8.

NOTE

A vice must be used to secure the primary manifold during assembly.

NOTE

Refer to Section I, Table 1--6, Forward Right Manifold Parts List, for required parts.