MWO 5--2350--262--35--4
4--11
SECTION II INSTALLATION OF NEW FORWARD LEFT MANIFOLD
ASSEMBLY -- CONTINUED
4--5
INTERCONNECTION OF NEW FORWARD LEFT MANIFOLD ASSEMBLY
NOTE
Steps a and b below apply to Figure 4--5 and Table 4--1.
a.
Locate hydraulic hoses identified in following procedures, change hose band markers as applicable, and
connect to new forward left manifold assembly ports as indicated in Figure 4--5 and Table 4--1.
b.
Where applicable, replace identification and destination tags (band markers) attached to existing
hydraulic hoses re--routed and/or relocated as part of modification. Band markers are contained in
Underside Band Marker Kit, 12496969.
Figure 4--5. Identification of Forward Left Manifold Assembly ports