MWO-5-2350-262-35-4
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-4 - Page 39 of 207
MWO 5--2350--262--35--4
3--10
SECTION II INSTALLATION OF HDC PRIMARY MANIFOLD ASSEMBLY,
MANUAL SHUT–OFF VALVE V23, AND LEFT MAIN MANIFOLD PRESSURE
TRANSDUCER T7 -- CONTINUED
3--2
ASSEMBLY OF HDC PRIMARY MANIFOLD
CAUTION
Assembly should be performed in a clean environment and protective dust covers or caps
should be installed on all openings to prevent contamination. Dirt can damage parts and
cause malfunctions.
CAUTION
When securing primary manifold in vice grip, exercise extreme care not to mar any
surfaces or damage components.
CAUTION
Do not over torque. Failure to comply may result in damage to equipment.
NOTE
A vice must be used to secure the primary manifold during assembly.
NOTE
Refer to Section I, Table 1--3, Primary Manifold Parts List for required parts.
NOTE
Steps a through d apply to Figure 3--6.
Back to Top
